365速发

Product features

• ▪ 7-inch touch screen operation;
  
• ▪ Support multi language, convenient for different users;
  
• ▪ Built in environment automatic detection program, automatically detect the test environment and remind users;
  
• ▪ Programmable operation, realizing the setting function with one key;
  
• ▪ Built in international standard grade parameters, easy and fast operation;
  
• ▪ Rs232/usb interface, which can be controlled by PC and print test report.

Product parameters

• Product model: RV 16750
  

  DUT power supply system
  

  TP1. Main parameters of voltage rise characteristics
  

  Stable voltage UB
  

  Overvoltage amplitude
  

  Test interval
  

  Number of tests
  

  TP2. Main parameters of superimposed AC voltage
  

  Umax
  

  AC superposition amplitude Upp
  

  Sweep duration
  

  Frequency sweep times
  

  Sweep interval
  

  TP3. Main parameters of power supply voltage slow drop and slow rise
  

  Usmin
  

  Change range of slow descent and slow rise
  

  Step time of slow descent and slow rise
  

  Test interval
  

  Number of tests
  

  TP4. Main parameters of instantaneous drop of power supply voltage
  

  Supply voltage
  

  Voltage drop amplitude
  

  Interruption time
  

  Rising and falling time
  

  Number of tests
  

  Test interval
  

  TP5. Main parameters of voltage sag reset performance
  

  Supply voltage
  

  time interval
  

  Number of runs
  

  Tp6. Main parameters of voltage starting characteristics
  

  Stable voltage UN
  

  Section - voltage drop amplitude us
  

  Second voltage drop amplitude UA
  

  The first - voltage drop stability time T6
  

  Rise time T7 from the first fall to the second fall transition
  

  Second drop voltage stabilization time T8
  

  Falling time tr from the stable voltage to the first falling voltage excess
  

  Recovery time TF of voltage transition from the second drop to the stable voltage
  

  Source impedance ri
  

  Allowable number of repetitions n
  

  Good communication range
  

  Xiangjia AC frequency
  

  Equipment power supply
  

  ambient temperature

• -
  

  12V system /24v system
  

  -
  

  12V±0.2V/24V±0.4V
  

  18V、24V/36V
  

  1~9999min
  

  1~9999 times
  

  -
  

  16V/32V
  

  1V、2V、4V/1V、4V、10V
  

  120s
  

  1~9999 times
  

  1~9999s
  

  -
  

  6.0v~10.5v (0.1v/ step) /10.0v~22.0v (0.1v/ step)
  

  0.5 ±0.1 V/min
  

  1min
  

  1~9999s
  

  1~9999 times
  

  -
  

  6.0v~10.5v (0.1v/ step) /10.0v~22.0v (0.1v/ step)
  

  4.5V/9v
  

  0.1~99.9s
  

  <10ms
  

  1~9999 times
  

  1~9999s
  

  -
  

  6.0v~10.5v (0.1v/ step) /10.0v~22.0v (0.1v/ step)
  

  1~9999s
  

  1~9999 times
  

  -
  

  12V/24V
  

  3V~8V/6V~10V
  

  5V~10V/10V~20V
  

  5ms~100ms
  

  5ms~100ms
  

  0.5s~20s
  

  5ms/10 ms
  

  5ms~100ms (5ms/ step)
  

  10mQ
  

  1-99 times
  

  2v
  

  2Hz
  

  AC220V± 10% 50/60Hz
  

  15℃~35C
  

  1min
  

  1~9999s
  

  1~9999次
  

  -
  

  6.0V~10.5V(0.1V/步)/10.0V~22.0V(0.1V/步)
  

  4.5V/9v
  

  0.1~99.9s
  

  <10ms
  

  1~9999次
  

  1~9999s
  

  -
  

  6.0V~10.5V(0.1V/步)/10.0V~22.0V(0.1V/步)
  

  1~9999s
  

  1~9999次
  

  -
  

  12V/24V
  

  3V~8V/6V~10V
  

  5V~10V/10V~20V
  

  5ms~100ms
  

  5ms~100ms
  

  0.5s~20s
  

  5ms/10 ms
  

  5ms~100ms(5ms/步)
  

  10mQ
  

  1~99次
  

  2v
  

  2Hz
  

  AC220V± 10% 50/60Hz
  

  15℃~35C

Product recommendation

Single Phase 10A Voltage Dips Generator

Model：VDT S10

Voltage dips/sags, short interruptions are caused by failures of the power grid and power facilities or sudden large changes in loads. In some cases, there will be two or more consecutive dips or interruptions. Voltage changes are caused by continuous changes in the loads connected to the grid. If the EUT cannot respond in time to changes in the power supply voltage, it may cause malfunctions. Voltage dips generators are used to evalsuate the performance of electrical and electronic equipment when subjected to voltage dips/sags, short interruptions, and voltage changes. Products fully meet the requirements of standards IEC/EN 61000-4-11 and GB/T17626.11.

Learn more

Impulse current generator sur 20KA

Model：SUR 20KA

The lightning surge generator sur 20KA is used to inspect the anti surge protection devices such as zinc oxide arrester valve piece, varistor, SPD, TVs tube, gas discharge tube, etc. for surge impact test. The product produces 8/20us surge pulse waveform, and the technical indicators of the waveform comply with the provisions of national standards and IEC standards.

Learn more

Single phase 6kV burst generator EFT S6

Model：EFT S6

In the circuit, such as from the switching transient process (cutting off inductive loads, bouncing relay contacts, etc.), it will usually interfere with other electrical and electronic equipment in the same circuit. This kind of interference is characterized by high amplitude, short rise time, high repetition rate and low energy. Clusters of narrow pulses can charge the junction capacitance of semiconductor devices, which may cause circuit or equipment errors when accumulated to a certain extent. The burst generator determines a common reproducible evalsuation basis for evalsuating the performance of power supply ports, signal, control and grounding ports of electrical and electronic equipment when disturbed by electrical fast transient bursts. The products meet the requirements of new standards such as iec61000-4-4, en60100-4-4 and gb/t17626.4.

Learn more